Designing Connection Oriented Networks for Multi-Domain Path Resilience

A challenge in network management and control is the ability to account for multi-domain requirements in the network planning process. Especially in Connection Oriented Networks where multi-domain path finding is a critical issue, networks need to be designed in such a manner as to restrict the possibility of erroneous inter-domain path selection. In this paper we propose per-domain topology design considerations that would leverage accurate disjoint path computations in a multi-domain environment, covering requirements of end-to-end path resiliency. In multi-domain environments state information between domains is heavily aggregated, hiding internal topology details dictated by scalability concerns, but also by restrictive domain administration policies for privacy, and security. Disjoint path finding is strongly affected by the aggregation techniques, since they do not provide information on path overlap. To handle this issue we introduce a metric, the Overlap Factor (OF), that quantifies path overlap in domains. The OF can be passed as an additional parameter of the inter-domain information exchange model to evaluate disjoint end-to-end paths. Alternatively, if domains were appropriately designed, this additional parameter might not be needed in evaluating resilient pairs of inter-domain paths. We based our recommended topology design algorithm on exploiting locally known OF values within the context of Genetic Algorithms. Extensive simulations confirm that domains designed using our proposed algorithm, result into accurate multi-domain disjoint path identification, with a high success ratio compared to networks that are designed without inter-domain considerations.     

Synthesis, optical and morphological characterization of soluble main chain 1,3,4-oxadiazole copolyarylethers—potential candidates for solar cells applications as electron acceptors

New copoly(arylether)s containing substituted terphenyl, quinquephenyl, fluorene and anthracene moieties with aromatic 1,3,4-oxadiazole units were prepared and the resulting copolymers are soluble in common organic solvents. Investigation of their optical properties revealed that they emit blue and yellow light. Moreover, their photovoltaic response was studied in blends with poly(3-hexylthiophene) (P3HT) as the electron donor. Despite the low power conversion efficiencies it was shown that photo-induced electron transfer does take place and the performances are higher than a single layer P3HT device. In addition, an anthracene-fluorene-oxadiazole main chain copolymer (PAFOXD) was also examined in a single layer photovoltaic device and gave one of the highest reported open-circuit voltage (V_oc) values in the literature (0.89 V). Finally, a detailed morphological study of the blends and the PAFOXD surface using the atomic force microscopy (AFM) technique, revealed the effect of solvent selection to the preparation of thin films exhibiting the desired performance characteristics.     

Soft tissue differentiation using multiband signatures of high resolution ultrasonic transmission tomography

In this paper, we are interested in soft tissue differentiation by multiband images obtained from the High-Resolution Ultrasonic Transmission Tomography (HUTT) system using a spectral target detection method based on constrained energy minimization (CEM). We have developed a new tissue differentiation method (called "CEM filter bank") consisting of multiple CEM filters specially designed for detecting multiple types of tissues. Statistical inference on the output of the CEM filter bank is used to make a decision based on the maximum statistical significance rather than the magnitude of each CEM filter output. We test and validate this method through three-dimensional interphantom/intraphantom soft tissue classification where target profiles obtained from an arbitrary single slice are used for differentiation over multiple other tomographic slices. The performance of the proposed classifier is assessed using receiver operating characteristic analysis. We also apply our method to classify tiny structures inside a bovine kidney and sheep kidneys. Using the proposed method we can detect physical objects and biological tissues such as styrofoam balls, chicken tissue, calyces, and vessel-duct successfully.     

Absorbed dose measurements of a handheld 50 kVP X-ray source in water with thermoluminescence dosemeters

Absorbed dose rate measurements of a 50 kV(p) handheld X-ray probe source in a water phantom are described. The X-ray generator is capable of currents of up to 40 microA, and is designed for cranial brachytherapy and intraoperative applications with applicators. The measurements were performed in a computer-controlled water phantom in which both the source and the detectors are mounted. Two different LiF thermoluminescence dosemeter (TLD) phosphors were employed for the measurements, MTS-N (LiF:Mg,Ti) and MCP-N (LiF:Mg,Cu,P). Two small ionisation chambers (0.02 and 0.0053 cm(3)) were also employed. The TLDs and chambers were positioned in watertight mounts made of water-equivalent plastic. The chambers were calibrated in terms of air-kerma rate, and conventional protocols were used to convert the measurements to absorbed dose rate. The TLDs were calibrated at National Institute of Standards and Technology (NIST) in terms of absorbed dose rate using a (60)Co teletherapy beam and narrow-spectrum X-ray beams. For the latter, absorbed dose was inferred from air-kerma rate using calculated air-kerma-to-dose conversion factors. The reference points of the various detectors were taken as the center of the TLD volumes and the entrance windows of the ionisation chambers. Measurements were made at distances of 3-45 mm from the detector reference point to the source center. In addition, energy dependence of response measurements of the TLDs used was made using NIST reference narrow spectrum X-ray beams. Measurement results showed reasonable agreement in absorbed dose rate determined from the energy dependence corrected TLD readings and from the ionisation chambers. Volume averaging effects of the TLDs at very close distances to the source were also evident.     

Quantitative Evaluation of Thermal Inactivation Kinetics of Free-Floating Versus Surface-Attached Listeria innocua Cells

Surface pasteurization is one of the decontamination treatments that can contribute to better preservation of meat products retaining most of their quality characteristics relatively intact if compared with the raw products. The current research compares the kinetics of free-floating and surface attached Listeria innocua cells by using integrated microbial and heat transfer modelling approaches. Surface pasteurization treatments are applied on a (abiotic) Teflon® model system in a novel steam surface decontamination rig. The experimental set-up prevented following four technological aspects to occur, (1) cold purge migration to the surface during the heating process, (2) inactivation kinetics of a cocktail of microbes, (3) protective effect of food components, and (4) physical distribution of bacteria throughout the depth of the product skin. Microbial load predictions are performed based on the inactivation parameters obtained during free-floating cell experiments. These predictions, when compared with the microbial data of the surface treatments, prove that the surface attached cells were much more heat resistant, despite the experimental set-up preventing the aforementioned (technological) events to occur. Indeed, surface attached cells can have different physiological/phenotypical/genetical characteristics, such as cell aggregations, colony formations, presence of flagella. In a final step, three techniques are implemented to evaluate mathematically the kinetics of the surface attached cells. Overall, this research’s significance is lying in the quantitative assessment of microbial heat resistance. The technological reasons underlying the increased microbial heat resistance on biotic and abiotic surfaces should be reevaluated, taking into account possible physiological/phenotypical/genetical characteristics.     

Multilayer thermal object identification in frequency domain using IR thermography and vector fitting

This paper deals with the identification of the thermal parameters of multilayer objects using the concept of thermal impedance. In order to perform such identification, temperature evolution in time is obtained by an infrared camera after power excitation is applied in the investigated structure. Infrared thermography offers the advantage of being a noncontact temperature detection and measurement method. In many practical cases, it is impossible to use contact temperature measurements. Typically, the power in the form of a step function is applied. In order to calculate the thermal impedance of an object, temperature and power are converted into the frequency domain using the Laplace transform for s = jω. Then, the poles of the thermal impedance are identified using vector fitting, which allows calculating the thermal impedance as a sum of partial fractions. This corresponds directly to the Foster network of a thermal object. In addition, the vector fitting method offers much better convergence in comparison with other methods using the polynomial rational approximation of thermal impedance. A considerable improvement of the numerical Laplace transform in high frequency range is proposed. In this approach, the variable s = jω is replaced by , and then, the integration result is corrected by the Taylor series. It leads to a kind of filtering of the temperature signal.     

A Bio-Conjugated Fullerene as a Subcellular-Targeted and Multifaceted Phototheranostic Agent

Fullerenes are candidates for theranostic applications because of their high photodynamic activity and intrinsic multimodal imaging contrast. However, fullerenes suffer from low solubility in aqueous media, poor biocompatibility, cell toxicity, and a tendency to aggregate. C₇₀@lysozyme is introduced herein as a novel bioconjugate that is harmless to a cellular environment, yet is also photoactive and has excellent optical and optoacoustic contrast for tracking cellular uptake and intracellular localization. The formation, water-solubility, photoactivity, and unperturbed structure of C₇₀@lysozyme are confirmed using UV-visible and 2D ¹H, ¹⁵N NMR spectroscopy. The excellent imaging contrast of C₇₀@lysozyme in optoacoustic and third harmonic generation microscopy is exploited to monitor its uptake in HeLa cells and lysosomal trafficking. Last, the photoactivity of C₇₀@lysozyme and its ability to initiate cell death by means of singlet oxygen (¹O₂) production upon exposure to low levels of white light irradiation is demonstrated. This study introduces C₇₀@lysozyme and other fullerene-protein conjugates as potential candidates for theranostic applications.     

Poly(amino acid)-facilitated electrochemical growth of metal nanoparticles

Poly(amino acids) are natural chelating agents for various metal ions. Zinc ions were encapsulated in situ in a conductive polypyrrole film using polyglutamic acid as a localized complexing agent within the film. The subsequent electrochemical reduction of the metal ions to zero-valent metal leads to the formation of the nanoparticles. The electrochemical approach demonstrated in this report provides facile regeneration of the particles and also prevents aggregation of nanoparticles in the conductive polymeric film. The correlation of the amount of zinc with the thickness of the film indicates that the zinc resides largely in the outer layer of the film. TEM and EDS data show that the nanoparticles formed are composed of zinc and are 18 +/- 7 nm in diameter. The nanoparticle/ polymer composite was used to reduce halogenated organics, indicating its potential usefulness in remediation applications.     

The multimedia broadcast/multicast service

This article provides an overview of the multimedia broadcast/multicast service (MBMS) for universal mobile telecommunications system (UMTS) networks. We first outline the features of UMTS networks as defined by the 3rd generation partnership project (3GPP) in order to provide a background for the discussion to follow. We then present the overall MBMS architecture, the services that it provides to the users and the differences between the broadcast and multicast options. The implementation details of MBMS are explained in terms of the modifications needed to the network, the new signaling procedures required and the impact of MBMS on the radio part of the network. We then describe how the security architecture of UMTS is used to support content protection and key distribution for MBMS groups. We evaluate the prospects of MBMS by comparing it first with IP multicast and then with DVB‐H, considered by many to be the closest competitor of MBMS. Finally, we conclude with a discussion of the technical and business challenges still faced by MBMS. Copyright © 2006 John Wiley & Sons, Ltd.     

Radical Interface AA New Media Research Initiative

At the Architectural Association in London, Joel Newman, Theodore Spyropoulos and Vasilis Stroumpakos are spearheading the New Media Research Initiative. Here they call for architecture to abandon its hold on the formal qualities of the physical in favour of a mode of experience that provides an interface that fully reflects the way we inhabit space today. Copyright © 2008 John Wiley & Sons, Ltd.